Pioneer Stage 4 DEX-P99RS Manual Do Proprietário

Página de 92
Power cable connection diagram
Yellow/black (MUTE)
If you use an equipment with Mute function, wire this lead 
to the Audio Mute lead on that equipment. 
If not, keep the Audio Mute lead free of any connections.
Yellow/black (DOOR MUTE)
Connect to the lead which detects door opening. 
Usually, connect to the dome light control lead.
Antenna jack
High/Mid/Low/Subwoofer output
20 cm
(7 7/8 in.)
1.5 m
(4 ft. 11 in.)
Yellow (+ Battery)
Connect to the constant 12 V supply 
terminal.
Red (ACC)
Connect to terminal controlled by 
ignition switch (12 V DC).
Orange/white (ILL)
Connect to lighting switch terminal.
Black (chassis ground)
Connect to a clean, paint free metal location.
Fuse (7.5A)
Fuse resistor
Fuse resistor
Blue/white (SYSTEM REMOTE CONTROL)
Connect to system control terminal of the 
power amp or auto antenna relay control 
terminal (max. 300 mA 12 V DC).
IP BUS input (Blue)
This product
Wired remote input
Hard wired remote control adaptor 
can be connected (sold separately).
USB cable
Connect to separately sold USB device.
USB input jack
Connection method
2. Clamp firmly with 
needle nosed pliers.
1. Clamp the lead.
Note: 
• The position of the parking brake switch depends on the vehicle model. For details, 
consult the vehicle Owner’s Manual or dealer.
Fuse resistor
15 cm (5 7/8 in.)
Dock connector
Interface cable
50 cm (20 in.)
The dome light 
control lead
Connecting the units
Connecting the units