Pioneer Stage 4 DEX-P99RS Manual Do Proprietário
Installation
DIN Front-mount
Installation with metal strap and
screws
screws
1. Insert the mounting sleeve into the
dashboard.
• When installing in a shallow space, use a
supplied mounting sleeve. If there is enough
space behind the unit, use factory supplied
mounting sleeve.
space behind the unit, use factory supplied
mounting sleeve.
2. Secure the mounting sleeve by using
a screwdriver to bend the metal tabs
(90°) into place.
(90°) into place.
Dashboard
Mounting sleeve
53
182
3. Install the unit.
• Use commercially available parts when
installing.
Metal strap
Screw
Screw
(M4 × 8)
(M4 × 8)
Filrewall or metal support
Nut
• Make sure that the unit is installed securely in
place. Unstable installation may cause this unit to
malfunction, such as sound skip.
malfunction, such as sound skip.
4. Attach the trim ring.
Note
• Attach the trim ring with the grooved side facing
down.
Removing the Unit
1. Insert the supplied extraction keys
into both sides of the unit until they
click into place.
click into place.
2. Pull the unit out of the dashboard.
DIN Rear mount
1. Determine the appropriate position
where the holes on the bracket and
the side of the unit match.
the side of the unit match.
2. Tighten two screws on each side.
• Use either truss screws (5 mm × 8 mm)
or flush surface screws (5 mm × 9 mm),
depending on the shape of screw holes in the
bracket.
depending on the shape of screw holes in the
bracket.
Screw
Factory radio mounting bracket
Dashboard or
Console
Console
Fastening the front panel
If you do not plan to detach the front panel,
the front panel can be fastened with supplied
screw.
the front panel can be fastened with supplied
screw.
Fixing screw
Release knob