Olympus Stylus Tough TG-Tracker Manual Do Proprietário

20 EN

While the power switch is in the LOG position, the camera will log 
GPS and other sensor data (P. 22). Logs can be downloaded for use 
with the OLYMPUS Image Track (OI.Track) smartphone app.

Rotate the power switch to LOG.

•  Log recording will start. The indicator lamp lights 

green during recording.

•  To switch to the shooting display, rotate the power 

switch to ON.

•  Log recording does not function if no card 

inserted.

•  The camera automatically terminates log data acquisition and recording when 

the battery runs low. Rotate the power switch to OFF to save the log.

•  In LOG mode, the camera draws on the battery continuously to acquire 

location data.

•  An altitude (water depth) track can be viewed in the altitude (water depth) log 

display (P. 23). The camera can not display other track logs.

•  No additional log data can be recorded after temporary memory buffer used to 

store log data fills. If the buffer fills, rotate the power switch to OFF to save the 
log data to the card.

The current log is saved to the card when the power switch is rotated to 
OFF.

•  A message is displayed in the monitor when the 

power switch is rotated to or through the OFF 
position. If 10 seconds pass or you press OK 
while the message is displayed, log recording will 
end and the log will be saved to the card. If you 
rotate the power switch to LOG or ON before the 
10 seconds are up, log recording will continue 
and the log will not be saved to the card.

Continue LOG        

Exit 10

•  [Busy…] is displayed in the monitor while the log is saved. Do not remove the 

card while this message is displayed. Removing the card before the operation 
is complete could result in loss of the log file or in damage to the camera or 
the card.