Marantz SR7012 Manual Do Proprietário

Connecting the speaker cables

Carefully check the left (L) and right (R) channels and + (red) and –

(black) polarities on the speakers being connected to this unit, and be

sure to connect the channels and polarities correctly.

Peel off about 3/8 inch (10 mm) of sheathing from the

tip of the speaker cable, then either twist the core wire

tightly or terminate it.

Turn the speaker terminal counterclockwise to loosen it.

Insert the speaker cable’s core wire to the hilt into the

speaker terminal.

Turn the speaker terminal clockwise to tighten it.

Connecting the subwoofer

Use a subwoofer cable to connect the subwoofer. Two subwoofers can

be connected to this unit.
To use two subwoofers, set “Subwoofer” to “2 spkrs” in the “Speaker

Config.” setting. (v p. 229)
The level and distance can be set separately for Subwoofer 1 and

Subwoofer 2.

SW2

SW1

Contents