Sony HT-CT790 Manual Do Proprietário
19
US
C
o
nne
ct
ing and P
re
p
ara
tion
3
Fasten the screws in the wall.
The screw should protrude as
illustration.
The screw should protrude as
illustration.
4
Hang the holes of the mounting
bracket on the screws.
Align the holes at of the mounting
bracket with the screws, then hang
the unit on the two screws.
bracket on the screws.
Align the holes at of the mounting
bracket with the screws, then hang
the unit on the two screws.
Connecting to a Wired
Network
Network
Prepare the network by connecting the
system and PC to your home network
with a LAN cable.
system and PC to your home network
with a LAN cable.
The following illustration is the example
for connection of the system and PC to
your home network.
for connection of the system and PC to
your home network.
The server needs to be connected to the
same network as that of the system.
same network as that of the system.
Tip
We recommend that you use a shielded
straight interface cable (not supplied).
straight interface cable (not supplied).
(approx.
5/32 in)
5/32 in)
730 mm
(28 37/50 in)
(28 37/50 in)
3.5 mm to
4.5 mm
4.5 mm
Connecting to a PC or Router
with a LAN Cable
with a LAN Cable
Note
Internet
LAN cable
(not supplied)
(not supplied)
Server
Router
Modem