Sonos PLAYBAR Manual Do Proprietário
SONOS PLAYBAR
23
3.
Use an awl or other sharp object to punch 4 small holes through 4 of the marked locations on the template. (If additional
reinforcement is desired, 2 spare screws and anchors are included in the wall mount kit.) Placement may vary but holes
should be located toward the corners, away from center.
reinforcement is desired, 2 spare screws and anchors are included in the wall mount kit.) Placement may vary but holes
should be located toward the corners, away from center.
4.
Remove the template from the wall.
5.
Drill pilot holes.
Because the anchors and screws are designed to be self-starting, this step is optional. However pre-drilling will result in
a more accurate installation. Refer to the table below for more information.
a more accurate installation. Refer to the table below for more information.
Wall Material
Pre Drill
Use Wall Anchors
Use Screws
Wood Stud
with 1/8” (3mm) bit
No
Yes
Drywall (no stud)
with 3/16” (4.5mm) bit
Yes
Yes
Hard wallboard or double board
with 3/16” (4.5mm) bit
Yes
Yes
Plaster
with 1/4” (6.5mm) bit
Yes
Yes
Concrete or Brick
with 1/8” (3mm) bit
Yes
Yes