Yamaha YAS-706 Manual Do Proprietário
PREPARATION
➤ Connecting the unit
En
12
Connecting the unit
Connect a TV to the unit so that video input to the unit can be output to the TV. You can
also enjoy playback of TV audio on the unit.
also enjoy playback of TV audio on the unit.
HINT
• Use a 19-pin HDMI cable with the HDMI logo printed on it. A cable with a maximum length of 5 m (16 ft) is
recommended to prevent degradation of signal quality.
• For playback of 3D and 4K video content, use a high-speed HDMI cable.
• This unit supports HDCP version 2.2, a copy protection technology. For playback of 4K video, connect the
• This unit supports HDCP version 2.2, a copy protection technology. For playback of 4K video, connect the
unit to the HDMI input jack (one compatible with HDCP 2.2) on an HDCP 2.2-compliant TV.
• To play 4K (4:4:4) video content, set “4K MODE” to “MODE 1” (p. 51).
TVs that support Audio Return Channel (ARC)
Connect the TV to the unit with an HDMI cable (not supplied).
When connecting a TV that supports Audio Return Channel (ARC), enable the HDMI
control function (p. 46).
control function (p. 46).
HINT
• Use an ARC-compatible HDMI cable.
TVs that do not support Audio Return Channel (ARC)
Connect the TV to the unit with an HDMI cable (not supplied) and an optical digital audio
cable.
cable.
TV audio will be output through the unit by switching the unit’s input to TV using the TV
key on the remote control.
key on the remote control.
HINT
• If the TV has no optical jack
Connect the audio output jack on the TV to the ANALOG input jacks or COAXIAL input jack on the unit. TV
audio will be output through the unit by switching the unit’s input to ANALOG or COAXIAL using the
ANALOG or COAXIAL key on the remote control accordingly.
audio will be output through the unit by switching the unit’s input to ANALOG or COAXIAL using the
ANALOG or COAXIAL key on the remote control accordingly.
Connecting the unit to a TV
What is Audio Return Channel (ARC)?
In order for the unit to play audio from a TV, the TV must usually be connected to the
unit via an audio cable as well as an HDMI cable. If, however, the TV supports Audio
Return Channel (ARC), TV audio signals can be input to the unit via the HDMI cable
that outputs video signals from the unit to the TV.
In order for the unit to play audio from a TV, the TV must usually be connected to the
unit via an audio cable as well as an HDMI cable. If, however, the TV supports Audio
Return Channel (ARC), TV audio signals can be input to the unit via the HDMI cable
that outputs video signals from the unit to the TV.
HDMI
(ARC)
OUT (ARC)
HDMI
HDMI
Center unit (rear)
HDMI OUT (ARC)
jack
ARC-compatible HDMI input
TV
HDMI
OUT (ARC)
OPTICAL
TV
HDMI
HDMI
O
O
Center unit
(rear)
(rear)
HDMI OUT (ARC)
jack
HDMI input
TV input jack
Audio output
(optical digital)
TV
1. Remove the cap
2. Check the direction of the
plug