Yamaha YAS-706 Manual Do Proprietário
SETTINGS
➤ Initializing the unit
En
53
Updating firmware with connection of a USB flash
drive
drive
Download the latest firmware version from the Yamaha website to a USB flash drive,
which can then be used to update the unit’s firmware.
See information provided when updating firmware for details.
which can then be used to update the unit’s firmware.
See information provided when updating firmware for details.
1
Save this unit’s firmware to a USB flash drive.
2
Turn off the unit.
3
Connect the USB flash drive to the UPDATE ONLY jack on the unit’s
rear panel.
rear panel.
4
Hold down the
key and press the
key.
The firmware update begin.
Update progress can be confirmed using the indicators on the unit.
Update progress can be confirmed using the indicators on the unit.
If the update is completed successfully, all indicators on the unit will flash.
5
Press the
key on the unit.
The firmware update is complete.
NOTE
• If the firmware update fails, the indicator at far right on the unit will flash blue. Press the
key to turn unit
off and then on again, and repeat the procedure from step 1 again. If the firmware update fails again,
confirm the USB flash drive is correctly connected to the UPDATE ONLY jack.
confirm the USB flash drive is correctly connected to the UPDATE ONLY jack.
Follow the procedure below to initialize the unit.
1
Turn off the unit.
2
Hold down the
key and press the
key on the unit until all
indicators flash.
CONNECT
Update progress
CONNECT
Initializing the unit
CONNECT
Initialized