MartinLogan Motion® Vision X Manual Do Proprietário

7

Note: When installing the system in this configu-
ration, use the soundbar’s menu system to choose 
‘INSTAL > ON.WALL’.

Required tools (not included):
• Stud 

finder

• Level
•  Electric drill and drill bits
• Phillips 

screwdriver

Required hardware (included):
•  (1) Installation template
•  (1) Wall bracket

Required hardware (not included):
•  (5) Screws appropriate for mounting surface
• (5) 

Sheet rock anchors (sized for screws)

1  Locate mounting location using a level and the 

installation template (fig. 1). 

2  Mark the three central pilot hole locations and 

remove the installation template (fig. 1).

3  Using a stud finder, determine if there is a wall 

stud directly behind one of the three center 
screw locations (fig. 2a). 

WARNING! We strongly recom-
mend locating the wall bracket so 
at least one of the screw locations 
attaches to a stud. WARNING! 
To prevent injury, this apparatus must be secure-
ly attached to the floor/wall in accordance 
with the installation instructions.