Netgear AC1600 Manual Do Proprietário

until the problem goes away. The following table describes common MTU sizes and 
applications. 

1500

The largest Ethernet packet size. This setting is typical for connections that do not use 
PPPoE or VPN, and is the default value for NETGEAR routers, adapters, and switches.

1492

Used in PPPoE environments.

1472

Maximum size to use for pinging. (Larger packets are fragmented.)

1468

Used in some DHCP environments.

1460

Usable by AOL if you do not have large email attachments, for example.

1436

Used in PPTP environments or with VPN.

1400

Maximum size for AOL DSL.

576

Typical value to connect to dial-up ISPs.

 



Select Advanced > Setup > WAN Setup. 

In the MTU Size field, enter a value from 64 to 1500.

Click Apply.

Your change is saved.

The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host 
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).

The router is shipped preconfigured to use private IP addresses on the LAN side and to act 
as a DHCP server. The router’s default LAN IP configuration is:

LAN IP address. 192.168.1.1

Subnet mask. 255.255.255.0

These addresses are part of the designated private address range for use in private networks 
and are suitable for most applications. If your network requires a different IP addressing 
scheme, you can change these settings in the LAN Setup screen.

If you change the LAN IP address of the router while connected 
through the browser, you are disconnected. You will have to open a 
new connection to the new IP address and log in again.