Netgear AC1600 Manual Do Proprietário
Security
79
R6250 Smart WiFi Router
•
Single address restricts the service to a particular computer.
4.
Select the service type, either TCP or UDP or both (TCP/UDP). If you are not sure, select
TCP/UDP.
5.
In the Triggering Port field, enter the number of the outbound traffic port to open the ause
the inbound ports to be opened.
6.
Enter the inbound connection port information in the Connection Type, Starting Port, and
Ending Port fields.
7.
Click Apply.
The service is added in to the Portmap Table.
8.
Make sure that you enable port triggering so that the service that you added takes
effectwillis used.
Schedule Blocking
You can specify the days and time that you want to block Internet access.
To schedule blocking:
1.
Select Advanced > Security > Schedule.
2.
Set up the schedule for blocking keywords and services.
•
Days to Block. Select days on which you want to apply blocking by selecting the
appropriate check boxes, or select Every Day to select the check boxes for all days.
appropriate check boxes, or select Every Day to select the check boxes for all days.
•
Time of Day to Block. Select a start and end time in 24-hour format, or select All
Day for 24-hour blocking.
Day for 24-hour blocking.