Netgear AC1900 Nighthawk™ Manual Do Proprietário
Specify Network Settings
60
Nighthawk AC1900
WiFi Cable
Modem
Router
To change the LAN TCP/IP settings:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
network.
2.
Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3.
Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
The BASIC Home screen displays.
4.
Select ADVANCED > Setup > LAN Setup.
5.
In the IP Address field, type the IP address.
6.
In the IP Subnet Mask, type the subnet mask of the modem router.
The IP address and subnet mask identifies which addresses are local to a specific device
and which must be reached through a gateway or modem router.
and which must be reached through a gateway or modem router.
7.
Click the Apply button.
Your changes are saved.
If you changed the LAN IP address of the modem router, you are disconnected when this
change takes effect.
change takes effect.
8.
To reconnect, close your browser, relaunch it, and log in to the modem router