Netgear AC1900 Nighthawk™ Manual Do Proprietário

For 2.4 GHz, Up to 600 Mbps is the default setting. The other settings are Up to 289 
Mbps and Up to 54 Mbps.

At 5 GHz, Up to 1300 Mbps is the default setting, which allows 802.11ac and 802.11a 

wireless devices to join the network. The other settings are Up to 600 Mbps and Up to 
289 Mbps.

Click the Apply button.

Your settings are saved.

If you connected wirelessly to the network and you changed the SSID, you are 
disconnected from the network.

Make sure that you can connect wirelessly to the network with its new settings. 

If you cannot connect wirelessly, check the following:

Is your computer or wireless device connected to another wireless network in your 
area? Some wireless devices automatically connect to the first open network without 
wireless security that they discover.

Is your computer or wireless device trying to connect to your network with its old 
settings (before you changed the settings)? If so, update the wireless network 
selection in your computer or wireless device to match the current settings for your 
network.

Your router comes with preset WPA2 or WPA security. The password that you enter to 
connect to your network is unique to your router and is on the router label. NETGEAR 
recommends that you use the preset security, but you can change them. NETGEAR 
recommends that you do not disable security.



Launch a web browser from a computer or WiFi device that is connected to the network.

Enter http://www.routerlogin.net.

A login window displays.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and 
password are case-sensitive.

The BASIC Home page displays.

Select Wireless.

Under Security Options, select a radio button for one of the following WPA options:

WPA-PSK [TKIP]

WPA2-PSK [AES]