Bowers & Wilkins PX Wireless Manual Do Proprietário

Página de 27
4
ENGLISH
3. Battery Charging
PX headphones are shipped with battery power 
and may be used immediately, however, it is good 
practice to charge the battery fully before first use. It 
can take up to 3 hours for PX headphones to reach 
full charge. However it is possible to use them while 
the battery is charging.
Note: The indicator initially displays battery 
charge when PX headphones are switched on. 
Green indicates that the battery is above 30% 
charged. Yellow indicates that the battery is 
between 30% and 10% charged. Red indicates 
that the battery is below 10% charged. If the 
indicator blinks red, the battery charge is 
insufficient for headphones operation. Indicator 
illumination is fully described in Diagram 5.
Battery charging is described in the  
following paragraphs: 
•   Using the supplied USB charging cable, connect 
the headphones to a powered USB socket: a 
computer USB socket, a mains USB charger or 
an in-car charger. 
•   While charging, the headphone indicator will  
blink green. As the level of charge increases  
the illuminated period of the blink will get  
longer. When fully charged the indicator will  
remain illuminated. 
4. Wearing Your Headphones
Using your headphones correctly will help ensure 
that their performance reaches its full potential. First, 
identify the left and right ear pieces. Identification 
legends can be found on the lower inside of the 
headband as illustrated in Diagram 3.
Place the headphones on your head with the 
headband adjusted so that each ear piece sits 
comfortably over the ear as illustrated in Diagram 4. 
Ensure that the ear pieces are not pulling upwards 
and causing unnecessary pressure on your head.
We recommended that you return your headphones 
to their storage pouch when not in use.
Note: Wearing glasses that distort the profile 
of your ears may interfere with headphone 
Environment Filter performance. Similarly, hair 
trapped between your ears and the headphone 
ear-pieces may compromise proximity sensing.
5. Switching On and Off
To switch on your PX headphones, slide the power 
button sideways as shown in Diagram 5.
Your PX headphones are designed to switch 
intelligently to standby and disconnect from 
Bluetooth when not in use, and to wake up when 
worn, so there is generally no need to switch them 
off. Should you want to switch off however, slide the 
power button and hold it for a second or two. The 
indicator will flash red to confirm switch off. 
The headphones will provide an audio cue as they 
switch on and off.
Note: PX headphones left switched on 
but inactive for more than two minutes will 
automatically switch to standby mode to save 
battery power. 
Note: The sensitivity of the ear-piece proximity 
sensors that control switch on and standby can 
be adjusted within the headphone app.
Diagram 3: 
Identifying left and right
Diagram 4: 
Adjusting the ear-piece.
Diagram 5: 
Switching on.