Yamaha Pro Yamaha DGX-660B Manual Do Proprietário
Connections – Using Your Instrument with Other Devices –
DGX-660 Owner’s Manual
78
Re
fe
fe
re
n
n
c
e
5
Use the CATEGORY [
r] or [f] button
to select “Wireless LAN.”
6
Press the [EXECUTE] button to call up
the WIRELESS LAN display.
the WIRELESS LAN display.
“WIRELESS LAN - Infrastructure Mode” is the
default setting.
default setting.
7
Use the CATEGORY [
r] or [f] button
to select the desired operation, then
press the [EXECUTE] button.
press the [EXECUTE] button.
This operation lets you change the connection
mode.
For information on the WIRELESS LAN displays,
see the next section.
mode.
For information on the WIRELESS LAN displays,
see the next section.
Infrastructure Mode
• When “Wireless LAN” cannot be found even though the
USB wireless LAN adaptor has been connected, turn the
instrument off then on again.
instrument off then on again.
• For information on entering characters for the password
or settings, refer to page 83.
NOTE
NOTE
Network list
Select your personal network from this list to con-
nect automatically, or input the desired one manu-
ally. Use the CATEGORY [
nect automatically, or input the desired one manu-
ally. Use the CATEGORY [
r] or [f] button to
select this area, and then follow the instructions
below.
below.
Connecting to a network by selecting from the
list
1. Select the desired network by rotating the dial.
2. Press the [EXECUTE] button.
list
1. Select the desired network by rotating the dial.
2. Press the [EXECUTE] button.
For a network without a lock icon, this finishes
connecting to the network.
For a network having a lock icon (
connecting to the network.
For a network having a lock icon (
), the
PASSWORD display appears.
3. Enter the password on the PASSWORD display
by rotating the dial.
4. Select “Connect” by using the CATEGORY [
r]
or [
f] button, then press the [EXECUTE] but-
ton.
Connecting to a network manually
1. Select “Other” displayed at the very end of the
1. Select “Other” displayed at the very end of the
list by rotating the dial.
2. Press the [EXECUTE] button to call up the
OTHER NETWORK display.
3. Make SSID, security, and password settings by
rotating the dial.
4. Select “Connect” by using the CATEGORY [
r]
or [
f] button, then press the [EXECUTE] but-
ton.
UPDATE
Updates the network list on the display.
WPS
Connects this instrument to the network via WPS.
1. Select “WPS” by using the CATEGORY [
r] or
[
f] button, then press the [EXECUTE] button.
2. Press the WPS button on your access point
within two minutes.
INITIALIZE
Initializes the connection setup to the default fac-
tory status.
tory status.
Network list
• Make sure that your access point supports
WPS. About the confirmation and changes in
the access point settings, refer to the manual
of the access point.
the access point settings, refer to the manual
of the access point.
NOTE