Kenwood KMR-M322BT Manual Do Proprietário
18
ENGLISH
BLUETOOTH — Connection
Supported Bluetooth profiles
– Hands-Free Profile (HFP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
– Hands-Free Profile (HFP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
Supported Bluetooth codecs
– Sub Band Codec (SBC)
– Advanced Audio Coding (AAC)
– aptX codec (Qualcomm® aptX™) (for
– Sub Band Codec (SBC)
– Advanced Audio Coding (AAC)
– aptX codec (Qualcomm® aptX™) (for
/
)
Connect the microphone
BLUETOOTH®
Adjust the
microphone angle
microphone angle
Secure using cord clamps
(not supplied) if necessary.
(not supplied) if necessary.
MIC (microphone input terminal)*
Microphone
(supplied)
(supplied)
Rear panel
Pair and connect a Bluetooth device for the first time
1
Press
to turn on the unit.
2
Search and select this unit model name (KMM-BT5**HD/
KMM-BT3**U/KMM-BT3**/KMM-BT2**U/KMR-M3**BT) on the
Bluetooth device.
KMM-BT3**U/KMM-BT3**/KMM-BT2**U/KMR-M3**BT) on the
Bluetooth device.
“PAIRING” “PASS XXXXXX” Device name “PRESS” “VOLUME
KNOB” appears on the display.
• For some Bluetooth devices, you may need to enter the Personal
Identification Number (PIN) code immediately after searching.
3
Press the volume knob to start pairing.
“PAIRING OK” appears when pairing is completed.
Once pairing is completed, Bluetooth connection is established
automatically.
•
automatically.
•
/
/
/
:
“BT1” and/or “BT2” indicator on the faceplate lights up.
•
/
: “BT1” and/or “BT2” on the display window
lights up.
• This unit supports Secure Simple Pairing (SSP).
• Up to five devices can be registered (paired) in total.
• Once the pairing is completed, the Bluetooth device will remain
• Up to five devices can be registered (paired) in total.
• Once the pairing is completed, the Bluetooth device will remain
registered in the unit even if you reset the unit. To delete the paired
device, 22, [DEVICE DELETE].
device, 22, [DEVICE DELETE].
• A maximum of two Bluetooth phones and one Bluetooth audio device
can be connected at any time.
However, while in BT AUDIO source, you can connect to five Bluetooth
audio devices and switch between these five devices. ( 23)
• Some Bluetooth devices may not automatically connect to the unit after
pairing. Connect the device to the unit manually.
• Refer to the instruction manual of the Bluetooth device for more
information.
* For the location of the microphone input terminal/microphone input jack, refer to page 38.
JS_KWD_KMM_BT522HD_KN_EN_9.indd 18
7/7/2017 11:24:54 AM