Kenwood KMR-M322BT Manual Do Proprietário
ENGLISH
29
DISPLAY SETTINGS
Default: XX
DISPLAY
COLOR
SELECT*
SELECT*
1
Select color for ALL ZONE, ZONE 1 and ZONE 2 separately.
1 Select a zone. (See the illustration on page 28.)
2 Select a color for the selected zone.
2 Select a color for the selected zone.
INITIAL COLOR/VARIABLE SCAN/CUSTOM R/G/B/preset colors*
2
Default:
/
/
:
VARIABLE SCAN
: INITIAL COLOR
To make your own color, select [CUSTOM R/G/B]. The color you have made
will be stored in [CUSTOM R/G/B].
1 Press the volume knob to enter the detailed color adjustment.
2 Press
will be stored in [CUSTOM R/G/B].
1 Press the volume knob to enter the detailed color adjustment.
2 Press
S / T to select the color (R/G/B) to adjust.
3 Turn the volume knob to adjust the level (0 to 9), then press the knob.
DIMMER
Dim the illumination.
ON: Dimmer is turned on. ; OFF: Cancels.
DIMMER TIME: Set the dimmer on and off time.
1 Turn the volume knob to adjust the [ON] time, then press the knob.
2 Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default: [ON]: PM6:00 or 6:00PM; [OFF]: AM6:00 or 6:00AM)
ON: Dimmer is turned on. ; OFF: Cancels.
DIMMER TIME: Set the dimmer on and off time.
1 Turn the volume knob to adjust the [ON] time, then press the knob.
2 Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default: [ON]: PM6:00 or 6:00PM; [OFF]: AM6:00 or 6:00AM)
BRIGHTNESS
1 Select a zone. (See the illustration on page 28.)
2 0 to 31: Select your preferred brightness level for the selected zone.
2 0 to 31: Select your preferred brightness level for the selected zone.
TEXT SCROLL
AUTO/ONCE: Select whether to scroll the display information automatically,
or scroll only once. ; OFF: Cancels.
or scroll only once. ; OFF: Cancels.
*
1
For
/
/
/
*
2
Preset colors: RED1/RED2/RED3/PURPLE1/PURPLE2/PURPLE3/PURPLE4/BLUE1/
BLUE2/BLUE3/SKYBLUE1/SKYBLUE2/LIGHTBLUE/AQUA1/AQUA2/GREEN1/
GREEN2/GREEN3/YELLOWGREEN1/YELLOWGREEN2/YELLOW/ORANGE1/ORANGE2/
ORANGERED
BLUE2/BLUE3/SKYBLUE1/SKYBLUE2/LIGHTBLUE/AQUA1/AQUA2/GREEN1/
GREEN2/GREEN3/YELLOWGREEN1/YELLOWGREEN2/YELLOW/ORANGE1/ORANGE2/
ORANGERED
TROUBLESHOOTING
Symptom
Remedy
General
Sound cannot be heard.
• Adjust the volume to the optimum level.
• Check the cords and connections.
• Check the cords and connections.
“MISWIRING CHECK WIRING
THEN PWR ON” appears.
THEN PWR ON” appears.
Turn the power off, then check to be sure the
terminals of the speaker wires are insulated properly.
Turn the power on again.
terminals of the speaker wires are insulated properly.
Turn the power on again.
“PROTECTING SEND SERVICE”
appears.
appears.
Send the unit to the nearest service center.
• Sound cannot be heard.
• The unit does not turn on.
• Information shown on the
• The unit does not turn on.
• Information shown on the
display is incorrect.
Clean the connectors. ( 32)
The unit does not work at all. Reset the unit. ( 3)
(For
)
“SET ERROR”/“DEL ERROR”
Setting/deleting the remote control ID is unsuccessful.
Turn the power off, then turn on the power and
perform the operation again. ( 5)
Turn the power off, then turn on the power and
perform the operation again. ( 5)
HD Radio tuner/
Radio
• Radio reception is poor.
• Static noise while listening
• Static noise while listening
to the radio.
Connect the antenna firmly.
USB/iPod
“READING” keeps flashing.
Do not use too many hierarchical levels or folders.
Elapsed playing time is not
correct.
correct.
This is caused by how the tracks are recorded.
“LOADING” appears when
you enter search mode by
pressing
you enter search mode by
pressing
.
This unit is still preparing the iPod/iPhone music list.
It may take some time to load, try again later.
It may take some time to load, try again later.
JS_KWD_KMM_BT522HD_KN_EN_9.indd 29
7/7/2017 11:24:57 AM