Sony MEX-M71BT Manual Do Proprietário

Página de 53
15
GB
As part of the activation process, the 
SiriusXM satellites will send an activation 
message to your tuner. When your radio 
detects that the tuner has received the 
activation message, your radio will display: 
[SUBSCRIPTION UPDATED - PRESS ENT TO 
CONTINUE]. Once subscribed, you can tune 
to channels in your subscription plan.
Notes
• The activation process usually takes 10 to 15 
minutes, but may take up to an hour.
• Your radio will need to be turned on and receiving 
the SiriusXM signal to receive the activation 
message.
1
Press  
(browse).
2
Rotate the control dial to select 
[CHANNEL], then press it.
3
Rotate the control dial to select the 
desired channel, then press it.
To select channels from categories
1
Press 
 
(browse).
2
Rotate the control dial to select [CATEGORY], 
then press it.
3
Rotate the control dial to select the desired 
category, then press it.
The channel list appears.
4
Rotate the control dial to select the desired 
channel, then press it.
To store channels
1
While receiving the channel that you want to 
store, press and hold a number button (1 to 
6) until [MEM] appears.
To receive the stored channel, press MODE 
to select [SX1], [SX2] or [SX3], then press a 
number button (1 to 6).
To set a parental control
The parental control feature allows you to 
limit access to SiriusXM channels with 
mature content. When enabled, the parental 
control feature requires you to enter a 
passcode to tune to the locked channels. 
Information on setting up the passcode and 
locking channels can be found below.
1
Press MENU and rotate the control dial.
2
Select [GENERAL] 
 [SXM PARENTAL]  
[LOCK SELECT] 
 [LOCK-ON].
3
Enter the passcode by rotating the control 
dial on the unit or pressing 
/ on the 
remote commander.
To move the entry position, press 
/ 
(SEEK –/+) on the unit or 
/ on the 
remote commander.
The initial passcode is [0000].
4
After entering the passcode, press ENTER.
To unlock the channels, select [LOCK-OFF].
To change the passcode
1
Press MENU and rotate the control dial.
2
Select [GENERAL] 
 [SXM PARENTAL]  
[CODE EDIT].
3
Enter the current passcode on the current 
passcode input display, then press ENTER.
The initial passcode is [0000].
4
Enter your new 4-digit passcode on the new 
passcode input display, then press ENTER.
To change display items
Press DSPL to change as follows:
Channel Number (Default) 
 Channel Name 
 Artist Name  Song Title  Content Info  
Category Name 
 Clock
Selecting channels for SiriusXM