Nikon Coolpix W300 Manual Do Proprietário

Use any of the following methods to temporarily disconnect and reconnect the 
pairing.

• Switch the setting in Network menu M Airplane mode in the camera.

You can set it to On to turn off all communication functions in places where 
wireless communication is prohibited.

• Switch the setting in Network menu M Bluetooth M Connection in the 

camera.

• Switch the setting in the y Connect tab M Auto link in SnapBridge.

You can reduce battery consumption of the smart device by disabling this setting.

• To pair with another SnapBridge-supported camera, use SnapBridge to remove the 

registration of a paired camera in advance.

• If you have problems transferring images to a smart device, such as long transfer 

times, you may be able to fix them by unpairing and then re-pairing.

In SnapBridge, tap z in 
the y Connect tab, and 
then tap End pairing 

M 

Yes on the dialog that is 
displayed.

• The camera and smart device 

are unpaired.

For iOS, remove the registration of the device (registered as the 
camera name).

• If you do not remove the registration of the device, you cannot re-pair.

Connect

Connection options

End pairing

Allow Wi-Fi access

Select camera

Connect

Go

Close