Canon VIXIA HF G40 Manual Do Proprietário

Transferring Files to a Computer or FTP Server

You can wirelessly transfer files (recordings) directly to a computer or an FTP server. You will need a
correctly configured FTP server. During the manual setup procedure, you will need to enter the FTP
server's IP address, port, user name, password and file transfer destination (where the files will be
transferred to).

1 Camcorder: Open the desired movie index screen.

2 Open the [FTP Transfer] screen.

[MENU]

[Wi-Fi]

[FTP Transfer]

[OK]

3 Enter the FTP server's IP address for [FTP Server] and the port number for [Port].

4 Touch [Next].

5 Enter the user name and password and then touch [Next].

6 Enter the destination folder to be used for [Destination Folder] and then touch [OK].

• Depending on the FTP server's settings, the required text for the port number and destination

folder may differ. Check the settings on your FTP server.

• The camcorder will connect to the access point configured in Wi-Fi Connection Using an Access

Point (A 11).

• If no connections to access points have been saved in the camcorder, the message [Save the

access point] will appear on the screen. Touch [OK] to configure and save a new access point
connection (A 11) before continuing with this procedure.

• For details about this function, refer to Transferring Files to a Computer or FTP Server in the

camcorder's Instruction Manual (PDF file).

IMPORTANT

• Observe the following precautions when transferring files. Failing to do so may interrupt the transfer

and incomplete files may remain at the transfer destination.
- Do not open the double memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.

• If the file transfer is interrupted, select [New files] and perform the file transfer again.
• If incomplete files remain at the transfer destination, check the content and make sure they are safe

to delete before deleting them.

Operating modes:

Access point

Computer