Canon XC15 Manual Do Proprietário

Página de 226
63
Automatic Gain and ISO Limits
Automatic Gain and ISO Limits
Depending on the brightness of the surroundings, the camcorder will automatically raise the gain or ISO speed 
to try to get a brighter picture. Because doing so can lead to video noise, you can select a maximum limit for 
how high levels are raised. These limits are referred to as the automatic gain control (AGC) limit and auto ISO 
limit. Shooting with a smaller limit is useful as it results in a darker picture but less noise. This function is available 
when the shooting mode is set to “, ‚, or ’.
1 Press the MENU button.
 mode: If you set [v Camera Setup]> [2] > [ISO/Gain] to 
[Gain], you will be able to set the AGC limit; if you set [ISO/Gain] to 
[ISO], you will be able to set the auto ISO limit.
 mode: Because only the ISO speed can be adjusted for photos, 
you will be able to set only the auto ISO limit.
2 Open the submenu to set the AGC limit or auto ISO limit.
 mode: [v Camera Setup] > [1] > [AGC Limit] or [Auto ISO 
Limit]
 mode: [{ Camera Setup] > [1] > [Auto ISO Limit]
3 Touch [
] or [
].
• The AGC limit or auto ISO limit dial will appear at the bottom of the 
screen.
• Touch  [m] to remove the limit.
4 Drag your finger left/right along the dial to select the desired value.
• You can also push the joystick up/down until the position of the current value is highlighted in orange and 
then push left/right to adjust the value.
5 Touch [X].
• The AGC limit or auto ISO limit icon will appear on the left side of the screen.
Available ISO limit settings
* When this value is selected in 
 mode and the camcorder is switched to 
 mode, the auto ISO limit will be set to 
ISO2000.
Available AGC limit settings
Operating modes:
ISO speed
Clips 
(1/3-stop increments)
160, 200, 250, 320, 400, 500, 640, 800, 1000, 1250, 1600, 2000, 2500*, 3200*, 4000*
Photos 
(1/3-stop increments)
160, 200, 250, 320, 400, 500, 640, 800, 1000, 1250, 1600, 2000
Gain
Clips 
(1.5-dB increments)
0 dB to 28.5 dB
[v Camera Setup] 
(in mode) 
or 
[{ Camera Setup] 
(in mode)
[1]
[AGC Limit] or [Auto ISO Limit]
[m] (automatic)