Canon XC15 Manual Do Proprietário

Using the Waveform Monitor

The camcorder can display a simplified waveform monitor. You must first add [P Waveform Monitor] to the
right side of the FUNC. menu before displaying the waveform monitor. If you have already done so, start from the
second procedure,

To activate the waveform monitor

Preparation

1 Press the MENU button.

2 Open the [v Customize

Menu]

screen.

[

System Setup] > [2] > [v Customize Menu]

3 From the right side of the screen, select the function to remove from the

right side of the FUNC. menu.

4 From the bottom of the screen, select [P Waveform Monitor].

5 Touch [X].

To activate the waveform monitor

1 Touch [FUNC.] and then touch P [Waveform Monitor].

2 Touch [OK].

• The waveform monitor window will appear on the bottom right of the screen.

• Depending on the shooting mode, you will be able to adjust the aperture, shutter speed or ISO speed/gain

using the control dial (A 55).

• Touch [X] to deactivate the waveform monitor.

NOTES

• If you set an assignable button to [Waveform Monitor] (A 105), you can press the button to display the

waveform monitor.

• You can display the waveform monitor as part of the following functions in the FUNC. menu: [Aperture],

[Shutter], [ISO]/[Gain], [Exposure Lock] and [AE Shift]. When you do so, you can see in real time how adjusting
the settings affects the waveform monitor.

• Activating magnification while the waveform monitor is on the screen will deactivate the waveform monitor.

• The waveform monitor will not be output to an external device connected to the HDMI OUT terminal.

Operating modes:

[

System Setup]

[2]

[v Customize Menu]