Canon XC15 Manual Do Proprietário

Recording Audio

88

                                       

Using the MIC Terminal/Built-in Microphone while the 
Microphone Adapter is Attached

To use an external microphone connected to the MIC terminal or use the 
built-in microphone while the supplied microphone adapter is attached to 
the camcorder, follow the procedure below to deactivate the INPUT 
terminals.

1 Press the MENU button.

2 Open the [INPUT 1/2] submenu.

[¡ Audio Setup] > [1] > [INPUT 1/2]

3 Select [

Off] and then touch [X].

•

 will appear on the bottom right of the screen.

• Select [

On] to reactivate the INPUT terminals.

Using the INPUT 1/INPUT 2 Terminals

When the supplied microphone adapter is attached to the camcorder, you can use the INPUT terminals to 
record audio independently to two audio channels from a microphone or analog audio input source.

To select the audio source, set the INPUT 1 or INPUT 2 switch to 
LINE or MIC as necessary.

• To supply a microphone with phantom power, set the switch to 

MIC+48V instead. Make sure to connect the microphone first, before 
turning the phantom power on. Keep the microphone connected when 
turning off the phantom power.

• When using the INPUT terminals to record to only one channel, use the 

INPUT 1 terminal.

IMPORTANT

• When connecting a microphone or device that does not support 

phantom power, make sure to set the corresponding INPUT switch to 
MIC or LINE, respectively. If you set the switch to MIC+48V, the 
microphone or device may be damaged.

[¡ Audio Setup]

[1]

[INPUT 1/2]

[

 On]

INPUT 1/
INPUT 2 
switches