Canon XC15 Manual Do Proprietário
93
Recording Audio
Low-Cut Filter (Built-in Microphone)
Perform the procedure below to activate the low-cut filter for the built-in
microphone.
microphone.
1 Press the MENU button.
2 Open the [Built-in Mic Low Cut] submenu.
[¡ Audio Setup] > [2] > [Built-in Mic Low Cut]
3 Select the desired option and then touch [X].
Options
Adjusting the Microphone’s Sensitivity (Built-in
Microphone)
Microphone)
1 Press the MENU button.
2 Open the [Built-in Mic Sensitivity] submenu.
[¡ Audio Setup] > [3] > [Built-in Mic Sensitivity]
3 Select the desired option and then touch [X].
Options
Monitoring the Audio with Headphones
You can connect to the × (headphone) terminal any pair of
headphones with a
headphones with a
∅ 3.5 mm stereo mini plug to monitor
the recorded audio.
[
Low Cut 2]: For reducing the background sound of wind when recording outdoors in windy surroundings (for
example, on a beach or close to buildings). Note that when you use this setting some low-frequency
sounds may be suppressed along with the sound of wind.
sounds may be suppressed along with the sound of wind.
[
Low Cut 1]: For recording mainly people’s voices.
[j Off]:
For recording audio under usual conditions.
[h Normal]:
For recording audio under usual conditions.
[
High]:
For recording audio at a higher volume.
[¡ Audio Setup]
[2]
[Built-in
Mic Low Cut]
[j Off]
[¡ Audio Setup]
[3]
[Built-in Mic Sensitivity]
[h Normal]
× (headphone) terminal