Canon XC15 Manual Do Proprietário

Pre-recording Mode

When pre-recording mode is activated, the camcorder starts recording continuously into a temporary memory of
approximately 5 seconds so when you press the START/STOP button, the clip will contain also approximately
5 seconds of video and audio recorded before you pressed the button. Pre-recording is available only for HD
clips.

1 Touch [FUNC.] and then touch

[Pre REC].

2 Touch [

On] to turn on pre-recording mode and then touch [X].

•

appears on the upper right of the screen.

• Touch [

Off] to turn off pre-recording mode.

3 Press the START/STOP button to begin recording.

• The tally lamp illuminates.

4 Press the START/STOP button again to stop recording.

• The camcorder records the clip, including approximately 5 seconds of video and audio recorded before the

START/STOP button was pressed.

• The tally lamp goes out.

NOTES

• During pre-recording mode, the time code’s running mode (A 84) will be set to [Free Run], regardless of the

previous setting. When the time code is recorded, it will include the 5 seconds before the START/STOP button
was pressed. When pre-recording mode is deactivated, the running mode will return to its previous setting.

• Pre-recording cannot be used together with slow & fast motion recording.

• Pre-recording will be deactivated if you open the setup menus or change the look setting (A 65).

Operating modes: