Canon Speedlite 430EX III-RT Manual Do Proprietário

54

Wireless Settings

During radio transmission wireless shooting, the master unit’s LCD 
panel illuminates or turns off according to the charge status of the 
master unit and slave units (firing groups). The master unit’s LCD panel 
illuminates if the master unit and slave units are not fully charged. When 
the master unit and slave units are fully charged, the LCD panel 
illumination will turn off after approx. 12 sec. As the charge for the 
master unit and slave units becomes insufficient when you take a 
picture, the master unit’s LCD panel will be illuminated again.

You can save the wireless settings to the master unit and slave unit, 
and recall the settings later. Operate the master unit or slave unit 
separately depending on which unit’s settings are to be saved or 
recalled.

Select <L>.

 

Press the <1> button.

 

Turn <9> to select <L>, then 
press <8>.

 

Turn <9> to select <V> (save) 
or <J> (load), then press <8>.

 

Select <;>.

X

The settings are saved (stored in the 
memory) or the settings that were 
saved are set.

If any of the master unit or slave unit (firing group) is not fully charged, 
<G> will be displayed on the master unit’s LCD panel. Make sure to 
take the picture after checking either the <G> icon is not displayed on 
the LCD panel or the LCD panel is not illuminated.