Sony PS-HX500 Manual Do Proprietário
21
Maint
enanc
e
Replacing the Drive Belt
The drive belt will wear or may even break
over time. In such a case, replace it with a
new one.
To obtain a spare drive belt, contact your
dealer or the customer support website.
(See page 26.)
over time. In such a case, replace it with a
new one.
To obtain a spare drive belt, contact your
dealer or the customer support website.
(See page 26.)
1
Turn off your turntable and the
connected audio device and unplug
the AC adaptor from the power
outlet.
connected audio device and unplug
the AC adaptor from the power
outlet.
2
Remove the rubber mat.
3
Unhook the drive belt from the
motor pulley.
motor pulley.
4
Put your finger and thumb into the
platter's round holes to hold the
platter and remove the platter.
platter's round holes to hold the
platter and remove the platter.
5
Turn the platter upside down and
remove the drive belt.
remove the drive belt.
6
Wind a new drive belt around the
platter while keeping it untwisted.
platter while keeping it untwisted.
Note
Spare drive belts do not have the red
indication ribbon attached.
indication ribbon attached.
Cleaning the Dust Cover
and the Turntable Body
and the Turntable Body
Use a dry, soft cloth to clean the dust cover
and the turntable body.
When it is hard to wipe off the soil, use a
cloth moistened with a mild detergent
solution. Do not use any chemical solution,
such as alcohol, benzine, or paint thinner,
that damages the finish.
and the turntable body.
When it is hard to wipe off the soil, use a
cloth moistened with a mild detergent
solution. Do not use any chemical solution,
such as alcohol, benzine, or paint thinner,
that damages the finish.