NAD C 546BEE Manual Do Proprietário

The CD 9 remote control is provided with your C 546BEE Compact Disc Player 
to enable you to operate playback functions from the comfort of your chair or 
from virtually anywhere in the room. For reliable operation, there should be a 
clear line-of-sight path from the remote control to the front of the CD player. If 
the player does not respond to remote commands, it may be that this line-of-
sight path is obstructed by clothing, paper or furnishings.

Most of the buttons on the remote control handset have the same effect as the 
corresponding buttons on the front panel of the player. In addition, the handset 
is equipped with some extra buttons like the following function keys.

Using the direct-entry numeric keypad (0 to 9) causes the C 546BEE to jump 
directly to the beginning of a numbered track and commence play. Thus, to 
play Track 5, simply press “5”. To play Track 20, press “2” and “0”.

A particular track or file can be repeatedly played back by pressing [RPT] 
button. Toggle this button to repeat a track/file, folder, all tracks or all files. 
Corresponding icons like REPEAT, REPEAT FOLDER, or REPEAT ALL will 
be illuminated in the VFD as the particular repeat mode is selected. Turn 
off repeat mode by pressing the REPEAT button until the REPEAT icon is 
extinguished in the VFD. 

To repeat a sequence, implement the following procedures:
1  Press [RPT A-B] at your chosen starting point. “REPEAT A   B” is 

illuminated in the VFD with “B” blinking.

2  Press [RPT A-B] again at your chosen end point. “REPEAT A   B” stay 

illuminated. The repeat sequence begins. 

3  Press [RPT A-B] again to cancel the sequence. 

Toggle to reduce, turn off and restore VFD brightness. 

Use [PROG] button to start, review, edit or exit programming mode. In 
combination with [PROG] button, the [CLEAR] button allows the deletion of 
a programmed track during program review or edit sequence. 

. 

The [FILTER] button is used for selecting the bandwidth of the audio low 
pass filter for the CD, MP3 and WMA media being played. The options are 
NORMAL bandwidth and SLOW bandwidth. For some recordings, the SLOW 
bandwidth may provide a wide frequency range and spatial feeling. 

NORMAL: Select NORMAL bandwidth to engage a standard CD high-
pass filter slope for playback of CD, MP3, and WMA music through the 
two channel stereo audio jacks. 
SLOW: Select SLOW bandwidth to engage a gentle high-pass filter 
slope for playback of CD music through the two channel stereo audio 
jacks. This feature is particularly useful for higher bit rate recordings. A 
red icon is illuminated in VFD when SLOW filter is selected.