Marantz Reference Series SA-14S1 Manual Do Proprietário
23
ENGLISH
Specifying the desired sound quality
This unit is equipped with a sound quality adjusting function
which allows users to enjoy the desired playback sound quality.
šThis setting remains effective even if the power is turned off.
which allows users to enjoy the desired playback sound quality.
šThis setting remains effective even if the power is turned off.
Switching the filter characteristics
2 filter characteristic types can be selected for Super Audio CD
playback, and for audio CD playback. The 2 filter characteristics
types are explained below.
playback, and for audio CD playback. The 2 filter characteristics
types are explained below.
Filter
Type
Audio CD
Super Audio CD
FIL 1
Offers a short impulse
response for both pre-echo
and post-echo. Suitable
for large-information-
content audio. Produces
a deep sound image with
clearly-defined positional
relationships of the audio
sources.
response for both pre-echo
and post-echo. Suitable
for large-information-
content audio. Produces
a deep sound image with
clearly-defined positional
relationships of the audio
sources.
Precisely reproduces
high resolution
audio that has large
information content.
high resolution
audio that has large
information content.
FIL 2
This is a long coefficient
FIR filter with symmetric
pre-echo and post-echo
in the impulse response.
Resembles analog sound
quality.
FIR filter with symmetric
pre-echo and post-echo
in the impulse response.
Resembles analog sound
quality.
Attenuates portions
that exceed 100 kHz.
Characterized by a
well-balanced, smooth
sound.
that exceed 100 kHz.
Characterized by a
well-balanced, smooth
sound.
Press FILTER.
šThe setting cycles through the 2
modes (FIL1 / FIL 2) as shown below
each time the button is pressed.
each time the button is pressed.
FIL1
FIL 2
NOTE
The filter characteristics have a last memory function. These
settings remain in memory even if a disc change occurs, or if
the power is turned off.
settings remain in memory even if a disc change occurs, or if
the power is turned off.
Connect and playback from a devices with
digital audio connectors (Coaxial/Optical)
digital audio connectors (Coaxial/Optical)
1
Connect devices with digital
audio connectors to this unit
(
audio connectors to this unit
(
vpage 9).
2
Press DISC/INPUT to change
the input source to “Coaxial”
or “Optical” (
the input source to “Coaxial”
or “Optical” (
vpage 13).
The input digital audio signal is
displayed as shown.
“Coax:
displayed as shown.
“Coax:
zzzzzk” or
“Opt :
zzzzzk”
(
zzzz indicates the sampling
frequency. )
šIf the sampling frequency cannot be detected, “Unlock”
will be displayed.
n Files that can be played back
šSee “D/A converter” (
vpage 31).
NOTE
šDo not input non-PCM signals, such as Dolby Digital, and
DTS. This causes noise and could damage the speakers.
šIf the sampling frequency switches, such as from A mode
to B mode in a CS broadcast, muting may operate for 1 – 2
seconds, cutting the sound.
seconds, cutting the sound.
Using as a D/A converter