Jenoptik JD C 3.0 S Guia Do Utilizador

22

The camera is not 
running.

The power is not on.

Press the Power button to turn the camera 
on.

The batteries were not 
loaded properly.

The correct direction to insert the AAA 
batteries is indicated on the camera.

Batteries are depleted.

Replace with unused alkaline or fully 
recharged batteries (three AAA-size 
batteries).

The battery cover is not 
closed properly.

Close the cover correctly and securely.

The LCD is not 
displaying anything.

LCD is turned off.

Turn the LCD on, by pressing the LCD On/
Off button repeatedly until the LCD is on.

The battery level is low.

Replace the batteries.

Cannot take a picture or 
a video clip.

The camera is in correct 
mode.

Set the camera to correct mode. (p.8)

The flash is charging.

Wait until the flash finishes charging. (p.9)

The SD card or internal 
memory is already full.

•   Obtain a new SD card and insert it.
•   Download images to your computer, and 

then delete them to free up more space.

•   Delete unwanted files.

The SD card is not 
formatted correctly.

•   Format the SD card with the camera.
•   Ask SD card manufacturer for 

assistance.

Picture is too dark.

No enough light, while the 
flash is at Off mode.

•   Use Fill flash during night time.
•   Use Auto flash during daytime.
•   Adjust the exposure setting. (p.11)
•  When shooting picture with flash, 

always keep the distance between the 
camera lens and the subjects no less 
than 1.5m but no more than 2.5m.

The batteries are too low 
to fire flash.

Replace the batteries with new ones.

APPENDIX