Nikon Fisheye Nikkor 8 mm f/ 2.8 Lens Manual De Instruções

JAA79051-R.3624.A

- T2 ･ AF-S DX18-70/3.5-4.5G  -

Making of self-made tool

Connector

Use this range.

Main PCB

ＧＮＤ

ＶＣＣ（５．

０Ｖ）

ＭＲ－Ａ

ＭＲ－Ｂ

①

Remove the elements (condenser, transistor,

 

 IC, etc.) installed within the dotted line as

 

 shown in the left from both sides of PCB.

 

 Don’t remove the connector.

②

Cut the PCB at the dotted line.

③

Solder the cords at 4 pattern places on the

 

 PCB as shown in the left.

●

It is necessary to make a self-made tool by using the main PCB of repair part.  The self-made tool will be used

 

 for "INSPECTION AND ADJUSTMENT FOR THE WAVEFORM OUTPUT FROM MR ENCODER".

  

The making procedure is shown below.  Make a self-made tool according to this procedure.

     This tool is the same as the tool that was Self-made for AF-S24-85/3.5-4.5G or AF-S DX12-24/4G.

INC