Sony AF 16 mm f/ 2.8 Fisheye Lens Manual

HELP

SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)

Peel off the release paper (on the focus pattern side) of CL block, lay it and insert it into the square hole on outer barrel. (Fig. a)

Stand CL-002 block up. (Fig. b)

Put the tip of CL-002 block to the edge (Part A) on outer barrel and stick it. (Fig. c)

Peel off the release paper (on the zoom pattern side) of CL-002 block. (Fig. d)

Stick the CL-002 block while putting it to the standard B. (Fig. e/f)

Roll CL-002 block up tracing the guide line and stick it to be fitted to the corners C and D. (Fig. g/h)

Peel off the release paper (on the part E) of CL-002 block, stick it to be fitted to the shape of outer barrel. (Fig. i/j)

Note:

Be to stick it so that there is no floating point at the part F. (Fig. j)

Stick it fitting to the edge of outer barrel. (Fig. k)

Note:

Be sure not to bring it out to the arrow direction.

Wrinkle the flexible board while pulling slightly CL-002 block.

10. Wrinkle the part G of CL-002 block lightly. (Fig. m)

Fig.a

Fig.b

Fig.c

CL-002 Block

Part A

Hole of the
Outer Barrel

CL-002 Block

Fig.d

Fig.e

Fig.f

Release Paper

Standard B

CL-002 Block

Fig.g

Fig.h

Corner D

Corner C

Fig.i

Fig.j

Part E

GL-002 Block

Part F

CL-002 Block

Fig.k

Fig.l

Fig.m

Part G