Comp X Security Products Inc 421860 Manual Do Utilizador
When draining or adding lubricant, do not allow dirt, debris
or other contaminants to enter the engine. (00198a)
or other contaminants to enter the engine. (00198a)
6.
If the lubricant level is below the A (ADD) mark, add
lubricant. Do not overfill. If the lubricant level is above the
F (FULL) mark, leakage may occur. The transmission fluid
capacity is approximately 32 fl. oz. (0.946 liters).
lubricant. Do not overfill. If the lubricant level is above the
F (FULL) mark, leakage may occur. The transmission fluid
capacity is approximately 32 fl. oz. (0.946 liters).
a.
When filling the transmission, use Screamin' Eagle
SYN3 Synthetic Motorcycle Lubricant.
SYN3 Synthetic Motorcycle Lubricant.
b.
If SYN3 is not available and addition of lubricant is
required, SYN3 must be completely drained before
using other lubricant products. A residual amount of
fluid will remain. It is not required to flush out the
residual fluid.
required, SYN3 must be completely drained before
using other lubricant products. A residual amount of
fluid will remain. It is not required to flush out the
residual fluid.
7.
Inspect o-ring for tears or damage. Replace if required.
Wipe any foreign material from plug.
Wipe any foreign material from plug.
8.
Install threaded filler plug/dipstick and tighten clockwise
to 25-75 in-lbs (2.8-8.5 Nm).
to 25-75 in-lbs (2.8-8.5 Nm).
om00973
Figure 49. Transmission Filler Plug/Dipstick: FLHTCUSE3
Maintenance and Lubrication 145