Atico International Ltd. ATICO01 Manual Do Utilizador
APPLICANT: ATICO INTERNATION
AL
(ASIA) LTD.
FCC ID: VDDATICO01
IMPORTANT INFORMATION REQUIRED BY THE FCC
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED
BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
!!
CAUTION
-- To reduce the risk of personal injury or product/property
damage:
• Do not immerse the product in water or other liquid.
• Do not immerse the product in water or other liquid.
Battery Handling and Usage
WARNING: Keep batteries away from children and pets.
• Do not mix a used battery with a new battery, or mix different chemistries or sizes
• Do not mix a used battery with a new battery, or mix different chemistries or sizes
of batteries.
• Insert the batteries observing the proper polarity (+/−) as indicated inside the
Battery Compartment.
CAUTION: Failure to properly align the battery polarity can cause personal injury
and/or property damage.
and/or property damage.
• Never throw batteries into a fire. Do not expose batteries to fire or other heat
sources.
Installing Batteries of Light:
Slide the Power Switch to OFF. Open the Battery Compartment and place four “AAA”
size alkaline batteries (not included) into the Battery Compartment according to the
polarity indications. Close the Battery Compartment.
Replacing Light Switch Battery:
1. Remove the front of the Light Switch as described below.
2. Remove the spent battery and place a new A23, 12-volt, alkaline battery into the
1. Remove the front of the Light Switch as described below.
2. Remove the spent battery and place a new A23, 12-volt, alkaline battery into the
Battery Compartment, correctly observing the polarity indications.
3. Replace the front of the Light Switch with the Screws.
To Set Up
• The Light may be operated without the Light Switch (see “To Use” section).
• Both the Light and Light Switch have a key hole for one mounting option. If
• Both the Light and Light Switch have a key hole for one mounting option. If
desired, place the keyhole onto a screw or nail that will safely support the
item.
item.