SEW-EURODRIVE GmbH & Co KG NKRDCMA82 Manual Do Utilizador
Mounting Instruction
MOVIPRO
Option: 1796 6167 WLAN-Karte #MPCI
Option: 1796 6167 WLAN-Karte #MPCI
Für diese technischen Unterlagen behalten wir uns alle Rechte vor / Copyright reserved / Tous droits de modification réservés
SEW-EURODRIVE GmbH & Co KG Postfach 30
1. Mounting of 1st WLAN Card
Used Material:
PartNo.
Qty.
Designation
1824 0461
1
REC5 IP5K BASE prg.
1813 0569
1
Thermal Pad WLAN
1796 6167
1
WLAN-Karte #MPCI
Production Step:
!!!the device must be powered off
a)
Bond 1x " Thermal Pad WLAN
b)
Attach the WLAN card in parallel
Take care of the WLAN card Slot
c)
Insert the WLAN card completely i
d)
Press WLAN card at the pressure
hearable click. Both latches must be closed completely now
Drawings:
Figure 1 - Device with Thermal Pad
Figure 2 - Attach WLAN card in parallel to MiniPCI Slot
WLAN1
Karte #MPCI-DCMA-82-MMCX
alten wir uns alle Rechte vor / Copyright reserved / Tous droits de modification réservés
3023
.
.
.
.
D-76642 Bruchsal Tel. ( 07251 ) 75-0
.
.
.
.
Fax ( 07251 ) 75
WLAN Card (WLAN1 mandatory)
REC5 IP5K BASE prg.
WLAN
Karte #MPCI-DCMA-82-MMCX
the device must be powered off before mounting the card(s)
Thermal Pad WLAN " in left red marked area of WLAN1 interface
parallel to the MinPCI Slot (WLAN1) in an angel of about
ard Slot!
completely in the MiniPCI Slot (WLAN1)
pressure points down. The latches of the MiniPCI connector must close with a
Both latches must be closed completely now!
card in parallel to MiniPCI Slot
WLAN1
DE
Page
1/
7
FK-FN
08.12.10
alten wir uns alle Rechte vor / Copyright reserved / Tous droits de modification réservés
75-1970
.
.
.
.
http://www.sew.de
mandatory)
Used Tools:
no
before mounting the card(s)!!!
in an angel of about 25°
MiniPCI connector must close with a