Ulrich Alber GmbH EMOTIONM15W Manual Do Utilizador

5. Charge status of the battery pack
The charge status of the two e-motion battery packs is indicated by the LEDs [1] attached 

to the wheel. Please note that because of different drive moments or possibly differently 
adjusted wheels the current consumption may also vary (see Chapter 6).

Each time when switching on a wheel and after each operation of the push rim, one or 

several LEDs come on (refer to the following table) and indicate the respective charge 
status of the battery pack. The LEDs go off after approx. 10 seconds and the top green 
LED (signal for the operational readiness of the wheel) flashes approx. every 2 seconds.

They mean:
5 LEDs come on – Battery pack is charged 100 %.
Avoid driving down slopes at high speeds because a forced shut-down of the wheel may occur due to the current return in 
the wheels and the risk of overvoltage in the battery pack. 

4 LEDs come on – Battery pack is charged 80 %.

3 LEDs come on – Battery pack is charged 60 %.

2 LEDs come on – Battery pack is charged 40 %.
We recommend not driving too far without charging the batteries first.

1 LED comes on – Battery pack is charged 20 %.
Charge the batteries before starting a ride.

1 LED (red) flashes – Battery pack is charged 10 %.
Charge the batteries before starting a ride.

11

GA-M15_EN.indd   19

14.08.2008   17:08:24