ZIONCOM ELECTRONICS LTD. WX009 Manual Do Utilizador
Quick setup for EX1200M
1
'"2
4
Scan the QR code to download our cell phone App for quick setup.
Place the Extender within the range of your wireless router, plug it into an
electrical outlet, and then move the toggle switch to “ON” position.The
Power LED turns solid on.
electrical outlet, and then move the toggle switch to “ON” position.The
Power LED turns solid on.
1
Use any wireless network manager utility on your cell phone to find and connect
to the Extender wireless network name (SSID) “TOTOLINK_extender_setup”.
to the Extender wireless network name (SSID) “TOTOLINK_extender_setup”.
Note:
* The SSID may be too long and are only partially displayed. Try to touch
them to view their full names.
* The SSID may be too long and are only partially displayed. Try to touch
them to view their full names.
2
2.4GHz Wireless Setup
5GHz
Yktgnguu"pgvyqtm
Fkucdngf
UUKF
Search APs
rcuuyqtf
use
ujqy
Available network.
Check
TOTOLINK_DC7C
In the “Password” field, type the network password, and then touch “Check”.
If the message “Available network” is shown below, it means that the SSID
and password are verified correctly and that you can continue with the
following steps.
If the message “Available network” is shown below, it means that the SSID
and password are verified correctly and that you can continue with the
following steps.
5
5GHz Wireless Setep
Disabled
Account
Password
Account
ujqy
wug
Save settings
and restart
Message
System would be restarted
connect again later.
OK
Cancel
Touch “Save settings and restart” at the bottom, and then “OK”.This will
reboot the extender. It may take a minute, please wait. A message appears
to show you the Wi-Fi settings of the extended wireless router.
reboot the extender. It may take a minute, please wait. A message appears
to show you the Wi-Fi settings of the extended wireless router.
6
After the wireless connection is established, a browser from your cell phone
should automatically open and take you directly to the on-screen setup guide.
Touch “Change” to set the Extender to a band mode as needed. The default
the Extender in this manual.
should automatically open and take you directly to the on-screen setup guide.
Touch “Change” to set the Extender to a band mode as needed. The default
the Extender in this manual.
Note:
* You can also use the default IP address 192.168.254.1 in a browser to
access the Extender network setup guide after you connect the SSID.
* To prevent Web connection failure between the Extender and your Apple
iOS device, touch the message “Don’t connect to the Internet”.
* You can also use the default IP address 192.168.254.1 in a browser to
access the Extender network setup guide after you connect the SSID.
* To prevent Web connection failure between the Extender and your Apple
iOS device, touch the message “Don’t connect to the Internet”.
3
Quick setup for EX1200M
1
Specifications
3
Adjust the position of the Extender
2
After the Extender restarts, its original SSIDs won’t display on your cell
phone. Use your device to find and connect to the new extended network
with the same Wi-Fi SSID and password that you use for the wireless
router.
phone. Use your device to find and connect to the new extended network
with the same Wi-Fi SSID and password that you use for the wireless
router.
7
As long as the setup on the Extender is finished, it won’t change unless
you perform the reset operation. You can move it to another place within
the wireless range and experience the extended distance of your Wi-Fi
network.
you perform the reset operation. You can move it to another place within
the wireless range and experience the extended distance of your Wi-Fi
network.
1
In order to get a better effect of the signals’ extending, please ensure
there are at least two signal LEDs light up. Otherwise, please adjust the
position of the extender.
there are at least two signal LEDs light up. Otherwise, please adjust the
position of the extender.
Note:
* Place the Extender in an open space, and keep the number of walls
and ceilings between to a minimum.
* Keep away from electrical devices that are potential sources of
electromagnetic interference, including microwaves, Bluetooth
devices,or other 2.4 GHz household appliances.
* Place the Extender in an open space, and keep the number of walls
and ceilings between to a minimum.
* Keep away from electrical devices that are potential sources of
electromagnetic interference, including microwaves, Bluetooth
devices,or other 2.4 GHz household appliances.
2
Quick Installation Guide
Wireless AC Range Extender
Model
：EX1200M
V1.1710
Modes
Description
(Default)
(Paralleled)
Work with both the wireless router and client devices in 2.4G network.
Work with both the wireless router and client devices in 5G network.
Work with the wireless router in 2.4G network and client devices in 5G network.
Work with the wireless router in 5G network and client devices in 2.4G network.
networks.
networks.
corresponding network.
(Crossed)
!
Band modes for switching frequency ranges
2.4GHz
Yktgnguu"Ugvwr
5GHz
ᵆ㘥㚷㙂䌤㛔
Disabled
SSID
"""""APs
ጬ⽧
ۥⲎ
ujqy
Cxckncdngf
ejgem
TOTOLINK_DC7C
Account
password
Account
show
use
Save settings
and restart
admin
2.4GHz
Yktgnguu"Ugvwr
Disa
SSID
ጬ⽧
qy
Cx
TOTOLINK DC7C
Account
password
Account
show
use
Save settings
and restart
admin
5G
G
abled
bled
ed
d
D
APs
⽧
uj
cknc
em
TOTOLINK_DC7C
4BWFTFUUJOHMFGUTFDPOET
4ZTUFNJTCFJOHSFTUBSUFE
&YUFOEFS*1"EESFTT 192.168.0.254
TOTOLINK_DC7C
5050-*/,@%$$@(
2.4GHz
44*%
5GHz
44*%
< Settings
CHOOSE A NETWORK…
Other…
Ask to Join Networks
Wi-Fi
Wi-Fi
TOTOLINK_DC7C
CMCC
TOTOLINK_DC7C_5G
2.4GHz
ᵆ㘥㚷㙂䌤㛔
5GHz
Yk/Hk
Fkucdngf
Ceeqwpv
SSID
Rcuuyqtf
Connect
ᵆ
ᵆ
ᵆ
ᵆ
ᵆ
Yk
Yk
Yk
v
v
v
v
TOTOLINK_test
F4-28-53-4F-1D-08
WPA2/
Ejcppgn11/100%
WPA2/
Ejcppgn11/100%
WPA2/
Ejcppgn6/44%
WPA2_ENTERPRISE/…
OPEN/
Ejcppgn6/31%
WPA2/
Ejcppgn1/91%
TOTOLINK_test1
64-09-80-4C-12-E2
TOTOLINK_test2
D8-38-FC-77-96-68
TOTOLINK_test3
D8-38-FC-37-96-68
TOTOLINK_test4
D8-38-FC-B7-96-68
TOTOLINK_DC7C
F4-28-53-31-03-E8
2.4GHz Wireless Setup
SSID
rcuuyqtf
Search APs
use
show
Connect
Check
Touch “Search APs” to search for 2.4G networks within the range according
to default 2.4G band mode. You can also manually change it if required.
to default 2.4G band mode. You can also manually change it if required.
4
IEEE802.11ac, IEEE802.11a, IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
IEEE 802.3, IEEE 802.3u
IEEE 802.3, IEEE 802.3u
，IEEE 802.3x
1 *10/100Mbps RJ-45 port
AC 100V~240V / 50~60Hz
5GHz WPS button
，2.4GHz WPS button，Power ON/OFF toggle switch，RST button
2.4G signal LED
，5G signal LED，Power LED，CPU LED，
5G EXT LED
，2.4G EXT LED，LAN LED
2 * external 5dBi fixed antennas
4.6" x 2.6" x 2.8"
2.4GHz/5GHz
Standards
Port
Power
Button
LEDs
Working environment
：32ʊ~122ʊ (0℃~50℃), 10%~90% (Non-condensing)
Storage environment: -40
ʊ~158ʊ (-40℃~70℃), 5%~90% (Non-condensing)
Environment
Antenna
Dimension
(W x H x D)
Frequency range
Wireless Speed
2.4GHz: 300Mbps / 5GHz: 867Mbps
Advanced tools
Cell phone UI and APP
Solid on: the power is on.
Off: the power is off.
Off: the power is off.
Flash every two seconds: the Extender is working properly.
Solid on: it lasts for 2 minutes when WPS button is pressed.
Flash quickly: when the reset process is being proceeded.
Solid on: it lasts for 2 minutes when WPS button is pressed.
Flash quickly: when the reset process is being proceeded.
5G signal LEDs: The number of lit LEDs indicates the wireless signal strength in
5G network between the Extender and the wireless router. The strength increases
with the number of lit LEDs.
5G network between the Extender and the wireless router. The strength increases
with the number of lit LEDs.
2.4G signal LEDs: The number of lit LEDs indicates the wireless signal strength in
2.4G network between the Extender and the wireless router. The strength increases
with the number of lit LEDs.
2.4G network between the Extender and the wireless router. The strength increases
with the number of lit LEDs.
Solid on: the Extender is exchanging 5G data with the wireless router.
Off: no 5G data is being transmitted between the Extender and the wireless router.
Off: no 5G data is being transmitted between the Extender and the wireless router.
Solid on: the Extender is exchanging 2.4G data with the wireless router.
Off: no 2.4G data is being transmitted between the Extender and the wireless router.
Off: no 2.4G data is being transmitted between the Extender and the wireless router.
Description
LEDs
LEDs description
Q2: When setting the Extender to connect to the wireless router, what
should I do if I want to use the new SSID and password for the
extended network instead of the original ones of the router?
A2: You can connect your cell phone or computer to the Extender
network using the SSIDs “TOTOLINK_extender” and
“TOTOLINK_extender_5G” and type the IP address 192.168.0.254
in your browser for login.
should I do if I want to use the new SSID and password for the
extended network instead of the original ones of the router?
A2: You can connect your cell phone or computer to the Extender
network using the SSIDs “TOTOLINK_extender” and
“TOTOLINK_extender_5G” and type the IP address 192.168.0.254
in your browser for login.
Q3: If I want to change the Extender to extend another Wi-Fi network
within the range but cannot access its configuration page now,
what should I do?
A3: Restore the Extender to its factory defaults and then start
configuration as needed. To reset the Extender, stick a paper clip
into the side panel “RST” hole and hold it for over 5 seconds until
the CPU LED flashes quickly.
within the range but cannot access its configuration page now,
what should I do?
A3: Restore the Extender to its factory defaults and then start
configuration as needed. To reset the Extender, stick a paper clip
into the side panel “RST” hole and hold it for over 5 seconds until
the CPU LED flashes quickly.
Q1: What are the additional two wireless network names ”TOTOLINK_
extender” and ”TOTOLINK_extender_5G” except for “TOTOLINK_
extender_setup”?
A1: You can use these two SSIDs to connect to the Extender wireless
network and login for advanced settings through the IP address
192.168.0.254 in the browser from your cell phone or computer.
extender” and ”TOTOLINK_extender_5G” except for “TOTOLINK_
extender_setup”?
A1: You can use these two SSIDs to connect to the Extender wireless
network and login for advanced settings through the IP address
192.168.0.254 in the browser from your cell phone or computer.
Copyright © 2017 TOTOLINK, All Rights Reserved.
Website: http://www.totolink.net
Information in this document is subject to change without prior
Website: http://www.totolink.net
Information in this document is subject to change without prior
notice.
APP
Mode
2.4GHz
5GHz
2.4GHz
5GHz
2.4GHz
5GHz
2.4GHz
5GHz
2.4GHz
5GHz
2.4GHz
5GHz
2.4GHz
5GHz
2.4GHz
5GHz
2.4GHz
5GHz
2.4GHz
5GHz
2.4GHz
5GHz
2.4GHz
5GHz
2.4GHz
5GHz
2.4GHz
5GHz
2.4GHz
5GHz
2.4GHz
5GHz
Oqfg
2.4GHz
5GHz
2.4GHz
5GHz
2.4GHz->2.4GHz and 5GHz
Ejcpig
Use Other Network
Cancel
The Wi-Fi network
“TOTOLINK_extender_setup” is not
connected to the Internet
Use Without Internet
Apple IOS device UI
Ensure at least two signal LEDs light up
FCC warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and(2) this device must accept any interference received, including
interference that may cause undesired operation.
device may not cause harmful interference, and(2) this device must accept any interference received, including
interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However,there is no guarantee that interference will not
occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However,there is no guarantee that interference will not
occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
#$& +&!&!
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
#$& +&!&!