Infinet Malta Limited LM-5X18 Manual Do Utilizador
InfiNet Wireless R5000
Technical User Manual
Copyright © 2004-2010 by InfiNet Wireless
67
MAC Switch
This section allows stating the switch mode on the unit and creating multiple
switch groups.
switch groups.
―Create Switch Group‖ button – creates a new switch group
―ethX‖ and ―rfx‖ check-boxes allows including the corresponding interfaces
into the switch group
Enabled - enables the corresponding switching group
STP – enables Spanning Tree Protocol feature at the switching group
IGMP – enables IGMP-Snooping feature at the switching group
Repeater – starts the repeater mode. In this mode the group switches the
packets simply by
sending them
to all the device‘s interfaces except the
one the packet was received from.
Admin – sets the switching group as the admin group. All the packets
originated by the unit itself (e.g. RIP/OSPF or ping) leave the MINT
network via the admin group. If ―No Admin Group‖ is selected such
network via the admin group. If ―No Admin Group‖ is selected such
packets isn‘t able to leave the network
―X‖ button – deletes the group
Up and down arrows allows to change the group's order
Group Rules – allows adding rules that defines what packets should be
processed by the group
Default Action – the action (permit or deny) taken on the packet if it
doesn‘t match to any rule
Help – displays help guidelines for rules creation using ―Group Rules‖
subsection
Management VLAN – sets a Management VLAN ID. When set the device
access and configuration are possible only via Management VLAN
―Enable Switch‖ check-box – starts switching on the unit.