Libelium Comunicaciones Distribuidas S.L. WASP03 Manual Do Utilizador
Waspmote product information
- Confidential Document
-
1 PRODUCT INFORMATION
1.1 GENERAL PROJECT INFORMATION
Waspmote is a wireless sensor mote developed by Libelium.
Waspmote is a board with radio modules and others componentes such as GPS
integrated.
integrated.
Waspmote works this way:
1º- Read the data from the sensors attached (if any)
2º- Send the information using the 2.4GHz or 900MHz radio and/or the GSM/GPRS
2º- Send the information using the 2.4GHz or 900MHz radio and/or the GSM/GPRS
module
3º- Sleep until the alarm wakes it up again
3º- Sleep until the alarm wakes it up again
Energy efficient architecture:
Waspmote can control separately the different modules and components
which takes the most part of the power. It lets sleep the microprocessor, the
which takes the most part of the power. It lets sleep the microprocessor, the
sensors, the communication modules choosing in each case which via we
want to set on or off.
want to set on or off.
Short, Medium and Long Range Communications Radios: (ZigBee/802.15.4
and GSM/GPRS protocols)
and GSM/GPRS protocols)
- 2.4GHz (1mW) is used to perform short range (300m) and low power
communications.
communications.
- 2.4GHz (100mW) is used to perform medium range (1300m)
communications.
communications.
- 900MHz (50mW and 100mW models) are used to perform medium range (up
to several km) communications.
to several km) communications.
- GSM/GPRS is used to connect to the mobile cells and to set
communications up to Km's, when alarm messages are generated. It works in
communications up to Km's, when alarm messages are generated. It works in
the GSM bands: 850 - 900 - 1800 - 1900MHz.
IMPORTANT: all the radio modules have both the FCC tests passed.
María de Luna 11, nave 5 instalaciones CEEI. 50018 Zaragoza. Tel 976547492. http://www.libelium.com 5 of 20