Lightcomm Technology Co. Ltd. SPBTBRICK2 Manual Do Utilizador

Before using your new product, please read  these instructions to prevent any damage.

1  Open the port cover on the back of your speaker.

2  Connect the small end of the charging cable to the micro USB port on 

the back of your speaker.

3  Connect the other end to a USB port on a USB wall charger or your 

computer.

4  To check the battery level, press the            (Power bank button).

1  Open the port cover on the back of your speaker.

2  Plug one end of a USB cable into your external device and the other 

end into the DC OUT port on your speaker.

3  Press and hold the            (Power bank button). Your external device 

charges.

1  Press and hold        (power) to turn on your speaker. The Bluetooth LED 

indicator blinks blue quickly and your speaker automatically enters 

pairing mode.

2  Make sure that your Bluetooth device is within 33 ft. (10 m) of your 

speaker.

3  Turn on your Bluetooth device, turn on Bluetooth, then enter pairing 

mode. For more information, see the documentation that came with 

your Bluetooth device.

•  Read these instructions.
•  Keep these instructions.
•  Heed all warnings.
•  Follow all instructions.
•  Do not use this speaker near water.
•  Clean only with a dry cloth.
•  Do not block any ventilation openings. Install in accordance with the 

manufacturer’s instructions.

•  Do not install near any heat sources such as radiators, heat registers, 

•  Unplug this speaker during lightning storms or when unused for long 

periods of time.

when the speaker has been damaged in any way, such as if the 

speaker is dropped, exposed to liquids, or does not operate normally.

injury.

•  Do not store the product in an extremely cold or warm environment.
•  Never dismantle the product.
•  Never let children play with the product.
•  Do not expose the product to dampness or moisture.
•  The product should not be exposed to dripping or splashing.
•  Pay attention to the environmental aspects of battery disposal.
•  Do not expose the speaker’s battery to excessive heat such as 

•  CAUTION: Danger of explosion if the battery is incorrectly placed. Do 

not try to replace the battery.

•  Bluetooth speaker  

•  USB cable 

•  Quick Setup Guide

•  Stereo speakers
•  Wirelessly stream from any Bluetooth device
•  Rechargeable battery lasts up to 40 hours
•  Integrated power bank charges your mobile devices
•  Water-resistant body

Move the Bluetooth device out 

of range.

Bluetooth device.
Connect your Bluetooth device 

to another Bluetooth device.

To reconnect...
Turn on your speaker. Your speaker searches 

for the last connected Bluetooth device and 

reconnects.
Make sure that your Bluetooth device is 

within 33 feet of your speaker.
Turn on your Bluetooth device, then make 

sure that Bluetooth is on.
Turn on Bluetooth on your Bluetooth device.

Disconnect your Bluetooth device from the 

other Bluetooth device, then set your device 

to pairing mode. Select NS-SPBTBRICK2 on 

your Bluetooth device.

4  On your Bluetooth device, select NS-SPBTBRICK2. Your speaker 

pairs with your Bluetooth device and the Bluetooth LED indicator 

lights solid blue.

5  To disconnect, un-pair your Bluetooth device from your speaker.
  OR
  Press and hold        (call) for three seconds on your speaker. Your 

Bluetooth device loses connection automatically.

Audio cable
•  Connect a 3.5 mm audio cable (not included) from your speaker’s 

AUX jack to your audio device’s headphone/audio out jack.

When your speaker is not paired to a device, the LED blinks blue.

Note: The Bluetooth range (33 ft./10 m) may be reduced if the wireless signal 

has to pass through walls or other obstructions.

Portable Speaker 

with Power Bank

Power button

Call button

Charging and 

battery 

power LED

Bluetooth 

LED
Volume +/- 

buttons

DESCRIPTION
Speaker is in pairing mode
Speaker is connected to Bluetooth device
Speaker is connected to an AUX device

Micro USB 

port

AUX in jack

DC OUT

Power 

bank 

button

DESCRIPTION
Charging
Fully charged

NS-SPBTBRICK2_17-0903_QSG_V2_EN.ai   1   2/1/2018   10:19:01 AM

BTD16-E 快速指南卡,英文,355.6*139.7mm(折叠后尺寸44.45x139.7mm),材质:80g书纸，17LHZ064-QSG-EN-V1.1)