Shenzhen CE and IT Limited V400 Manual Do Utilizador

USB Data Cable: Insert one end of the USB data cable into PC 

USB socket and connect the other into phone's USB socket at 

the top of the mobile phone. Besides, the data cable can be used 

as a charger while connecting with the PC. 

The new battery is not fully charged. You need to install and 

charge the battery before using the device. In general conditions, 

the new battery will work under best condition after several 

times of charge and discharge.   

♦ 

Connect the charger to the connection jack of the phone in 

proper direction, and connect the charger to a main socket. 

♦ 

The phone displays "Charger Connected!" and starts 

charging after properly connected. The battery icon 

dynamically displays the charging process. In switch-off 

state, the phone dynamically displays the charging process. 

♦ 

When the battery is fully charged, the charging process 

stops automatically, and the battery icon indicates full grid 

on the screen. After the battery is fully charged, remove 

the charger from the phone and socket as soon as possible.