Essence Security International ltd. ES6500EGE Manual Do Utilizador
Operation
58
EverGuard Express
Note: When the Photo Configuration dialog box is initially opened, all
checkboxes are unmarked, and all of the parameters are disabled.
checkboxes are unmarked, and all of the parameters are disabled.
To configure the Photo Scenario Configuration parameters:
1. On the Control Panel screen, click Photo Scenario Configuration button.
The Photo Scenario Configuration dialog box appears displaying the
Suspect tab.
Suspect tab.
Figure 31: Photo Configuration Suspect Tab
2. To access a specific tab page, click on the appropriate tab.
3. For all tabs (except for the Configuration tab), set the following parameters:
a. For Enable, check the checkbox to activate all parameters underneath.
b. For Transmit Photo automatically, check the checkbox to transmit the
photo automatically to the monitoring station.
4. For the SOS, and OPEN/CLOSE tabs, set the following additional parameters:
ID of first IPD associated with scenario
ID of second IPD associated with scenario
Set each of the devices to a designated ID between 1 and 32, which
corresponds to the appropriate IPD devices in the control panel.
corresponds to the appropriate IPD devices in the control panel.