Essence Security International ltd. ES800MGL Manual Do Utilizador
Installing WeR@Home™
WeR@Home™ Installation Guide
13
4. Gently shake the device.
5. Insert two AA alkaline batteries, observing the correct polarity.
Figure 10: Battery Insertion
The LED in the lens compartment flashes red, indicating that the motion detector has powered up
successfully.
successfully.
6. When prompted, enter a name and/or location for the device and tap OK. The motion detector
appears in the list on the Devices screen.
7. Clean and dry the mounting location surface.
8. Peel off the mounting-tape protective strips, required for the installation location.
Figure 11: Mounting Tape Protective Strips
9. Press the mounting-base into place.
10. If you have a pet on the premises, install a pet immune lens. Refer to Appendix E Installing a Pet
For installing in
a corner
a corner
For installing on
a flat wall
a flat wall