Handheld Group AB 14248G Manual Do Utilizador
NAUTIZ X8 MANUAL
42
handheld
9.
BLUETOOTH HANDLER
Bluetooth wireless technology is a short-range communications technology to connect portable and/or fixed
devices while maintaining high levels of security.
devices while maintaining high levels of security.
9.1. Enabling the Bluetooth Radio
1. Select the device panel indicated by the UP arrow in the lower, right portion of the display.
2. Tap Turn Bluetooth On.
The Bluetooth icon appears in the task bar.
NOTE:
In order to avoid wasting energy, the Bluetooth, module is off by default. If you need to have Bluetooth
working, the module must be powered on using the Wireless Communications applet.
NOTE:
Suspending the terminal powers off the Bluetooth radio and drops the Bluetooth connection. When the
terminal resumes, it takes approximately 10 seconds for the Bluetooth radio driver to re-initialize the
radio.
radio.
NOTE:
Area coverage and Bluetooth radio performance may vary, due to environmental conditions or
interference caused by other devices (microwave ovens, radio transmitters, etc.).
9.2. Connecting to Other Devices
Before connecting to another device, make sure that the Bluetooth connection on the other device is enabled.
1. Tap on the Bluetooth icon in the task bar. The Bluetooth Handler appears on the screen.
2. Add New Device. The available services of all devices / profiles in range display in the Bluetooth Handler.
9.3. Pairing Bluetooth Devices
Connecting Bluetooth devices usually requires that they be paired; the same passkey must be entered for each
device. If you want to connect the TERMINAL to a device without any input method (e.g., printers, headsets),
refer to the user documentation that accompanied the device for pairing information.
device. If you want to connect the TERMINAL to a device without any input method (e.g., printers, headsets),
refer to the user documentation that accompanied the device for pairing information.
1. Tap on the desired device / profile in the Bluetooth Handler.
2. Tap the Next Button on the bottom.
Once asked if you need to authenticate the device,
3. Enter 4 random digits and tap the Next button.
4. Enter the same digits on the other device when prompted.
5. After pairing, tap on the selected device / profile and select Active.
9.4. Setting Up a Bluetooth Printer
1. Make sure that the Bluetooth printer is on and activated.
2. If not done so already, turn Bluetooth On (by selecting the vertical arrow on the Command Bar).
3. Tap Scan Device, which runs a Bluetooth Inquiry, then SDP Query.
4. If you see your Bluetooth printer device displayed. You can press the Refresh button to search again.