Beijing Unistrong Science & Technology Co Ltd MG838001 Manual Do Utilizador

                              LOKA series Handheld High-accuracy Mobile GIS Solution 

 

10 

a)  Pressing red Power button for 1 second to starting up. 

b)  When the power indicator is green , loosen <Power> button.    After power on, 

the screen displays Windows Mobile icon. 

Note: If the device is already in use, but only in the midway is shut down (off screen), 

when you press <Power>, which will wake up the screen to run the previous interface. 

 

When the power indicator is red, long press <Power> for 3 to 5 seconds. Until the 

power indicator is black, the device is shutdown. 

 

‘Reset’ button is located in the right side of ‘Windows’ button. If the application of LOKA 

series appears unusual, you can use the touch pen to press the Reset button to force 

shutdown. 

 

If the touch screen of your device is not calibrated or when the screen is not very 

flexible for touching. Please calibrate the screen. Please get into screen setting page 

through setting mune->System->Screen. Click on the icon of the screen, and will 

appear the screen calibration interface. Please reference calibration guard . 

 

LOKA series can connect to computer via USB cable. you can browse and copy files in 

the device through Microsoft ActiveSync synchronization application. 

Following these steps: 

1) Connecting to computer via USB cable 

2) Make sure that the collector and computer are synchronous.