Rohrback Cosasco Systems ER200 Manual Do Utilizador
48
ER Probe Reader
Download Data Point from Reader
Before Downloading Data from the Reader, the user must first take a reading from the Reader. If this
has not been done, please refer to the
Take Data Point section.
Once the user finds an ER Probe Reader to download data from on the Transfer Unit select
Dl.
After the transfer of the data point from the Reader to the Transfer Unit is complete, a screen will
display information about the data on the Reader including the Divisions and Check Readings,
Temperature, Metal Loss and the time that the last data point was collected from the device.
To save the current data to the Transfer Unit select
Save.
Note: This option will only be available if the user read from the Reader
using a pre-configured ID.
Div: XXX.X Chk: XXX.X
Temp: XXXX.X C
MLoss: X.XXX mils
Next | Back | Exit
Time Stamp:
MM/DD/YY HH:MM:SS
Save | Back | Exit
Devices [UP/DOWN] X
[XXXXXXXXXX ]
Bk=Back Cl=Clear
Read | Dl | Bk | Cl