Rohrback Cosasco Systems ER200 Manual Do Utilizador
63
Bluetooth Suite
Enter the interval then select
m for minutes.
Note: the hours (h) option is disabled and will show INVAL if selected.
Enter a tag name for the device then select
Nxt.
To save the configuration of the device select
Okay.
Load ID onto Microcor Datalogger and ML-9500B
To load a configuration onto the MDL/ML9500 a configuration must be created. If the user has not
already created a configuration, please refer to the
Create an ID for a Microcor Device section.
Scroll through the list of devices on the Transfer Unit until the Bluetooth name of the desired Legacy
Converter is displayed and then select
Cfg.
On the following screen, select
MDL/ML9500.
Save?
ID: XX TAGNAME
Okay | Back | Exit
Interval:[ _ ]
min: (5 – 1440)
0123456789< m h Back
Tag:[ _ ]
ABCDEFGHIJKLMNOPQR
STUVWXYZ0123456789._-<
Clr | Nxt | Bck | Exit
Select Device
RDC-COT | MDL/ML9500
RDC-CAT |
Back | Exit
Devices [UP/DOWN] X
[XXXXXXXXXX ]
Bk=Back Sv=Save
Cfg | Dl | St | Bk | Sv