Xerox 003R06709 Manual Do Utilizador
Media Product Data Sheets
Xerox Wide Format Supplies Applications Guide
Version 2.0; April 2005
63
Xerox Outdoor Weatherproof Banner 280 micron - A Tyvek
®
Solution
Product Description
A highly tear-resistant material for producing vivid, full-color images, this white spun Tyvek
®
has a water resistant
coating for indoor and short-term outdoor banners. Images are water resistant for up to 4 months when printed with
pigment inks.
pigment inks.
The exceptional durability of this media provides maximum flexibility during post print handling, allowing for edge
sewing, taping and eyelets. If stitching, a double stitched hem with a maximum of 5 stitches per inch is recommended.
sewing, taping and eyelets. If stitching, a double stitched hem with a maximum of 5 stitches per inch is recommended.
Applications
Excellent for all indoor and short-term outdoor banner applications including retail point-of-purchase, trade show
backdrops, car showrooms, supermarkets, suspended ceiling displays, casino promotions, family gatherings, office
parties, museums, art galleries, entranceways, office corridors, banner kiosks, industrial signage (warnings, hazard,
etc.) – vertical or horizontal.
backdrops, car showrooms, supermarkets, suspended ceiling displays, casino promotions, family gatherings, office
parties, museums, art galleries, entranceways, office corridors, banner kiosks, industrial signage (warnings, hazard,
etc.) – vertical or horizontal.
Physical Properties
Base Weight
130 g/m
2
Caliper (microns)
280
Whiteness (CIE)
115
Opacity
95%
Product Code
Width
Length
m
2
023R01441
1372 mm
54"
20 m
66 ft
27
023R01524
1270 mm
50"
20 m
66 ft
25
023R01523
1067 mm
42"
20 m
66 ft
21
023R01442
914 mm
36"
20 m
66 ft
18
Compatibility
Printer
Ink Type
Xerox 8142/8160
Dye/Pigment
HP 7XX/8XX/2XXX/3XXX/5XXX
Dye/Pigment
Epson Stylus Pro 7000/9000/7500/9500/10000
Dye/Pigment
Epson Stylus Pro 7600/9600/10600
Ultrachrome
®
Encad Novajet
GA/GS/GS+/GX/GO
Encad 1000i
Dye/Pigment
Critical Operating Instructions
• For best results store and use within temperature of 50-86°F (10-30°C) and 35-65% relative humidity.
• Store the product in its original bag and box.
• Water-resistance tested with HP UV+ inks, Encad GO inks - Good for 3-4 months.
• Leave prints overnight before use to maximize water resistance.
• Structural base characteristics of Tyvek® may show through on prints.
• Unlaminated images are easily scratched and must be stitched hem side up so the sewing machine foot comes in
contact with the backside of the print.
• Lamination is recommended for prints requiring satin, matte, high gloss or other finishes and/or prints requiring
UV protection or greater general durability if they may be subject to moisture or handling. This media is suitable
for pressure (cold) or thermal (hot-melt) laminates. Heavier weight thermal laminates work best on this material.
Use at least a 125 or 250 micron laminate to avoid an “orange peel” effect between the media and the laminate.
for pressure (cold) or thermal (hot-melt) laminates. Heavier weight thermal laminates work best on this material.
Use at least a 125 or 250 micron laminate to avoid an “orange peel” effect between the media and the laminate.