Qiaoxing Telecom Industry Co. Ltd. TC-STC590-595 Manual Do Utilizador

If after pressing the Talk button, you receive three “beeps” and no dial tone, check the

following:

1. BASE UNIT is plugged into a power source.
2. If you had a power failure or had unplugged the BASE UNIT, replace the

HANDSET on the BASE UNIT for 2 to 5 seconds to reset the system.

NOTE:

If none of the telephones in the house are working, disconnect one set at a time to
verify that none of the phones are causing the problem. If you still have a problem
after doing this, and your telephone still does not work, please contact your local
phone company.

Problem Solving