Giant Telecom Limited X25Z55 Manual Do Utilizador

If level 0 is selected, the ‘No Ring’ icon

will be

shown.

Press [INT/OK] to confirm the selection.
To change the melody, choose either ‘EXT Ring’ or ‘INT

Ring’ for external or internal incoming call.

10 normal ring tone melodies can be selected.
User may change the ring melody by pressing

[MENU/ ] or [ /

]

The selected melody tone can be heard during selection.
Press [INT/OK] to confirm the selection.

Changing the name for the handset

User can change the handset’s name displayed during

standby by choosing ‘HS NAME’ from the menu.

If the handset name has been stored, the name will be
displayed and the user can change it.

Setting tones on/off

There are 4 kinds of tone can be set to on or off: key

tone, confirm tone (including error tone), low battery
tone and range out tone.

The key beep tone can be set to on or off by selecting

‘KEY’ from the menu ‘TONES’. The previous setting
‘On/Off’ can be seen.

Choose the desired setting and then press [INT/OK].
The other tones can be set as key tone.

Setting call timer on/off

The call timer display during a call can be set to on or off

by selecting ‘Timer’. Similar to setting key beep on/off,
the previous on/off setting will be shown after selection.

Choose the desired setting and then press [INT/OK].

Setting auto answer mode on/off

The auto answer function can be set to on or off by

selecting ‘Auto Ans’ from the menu. Similar to setting
key beep on/off, the previous on/off setting will be
shown after selection.

Choose the desired setting and then press [INT/OK].

Reset Handset Default setting

By choosing ‘Default’ under ‘Handset’, user will be

asked to confirm the resetting procedure.

Once confirmed, all the handset setting parameters will

be reset to default values.

Changing base ring tone melody &
volume

To change the melody, choose ‘Melody’ under ‘BASE’

and press [INT/OK].

10 normal ring tone melodies can be selected.
User may change the ring melody by pressing

[MENU/ ] or [ /

]

  The selected melody tone can be heard during selection.
  Press [INT/OK] to confirm the selection.
  To change the base ringer volume, pressing [MENU/ ]

or [ /

]

to choose ‘Volume’ under ‘Base’ and press

[INT/OK].

It is allowed to change the volume from 0 to 5 levels and

the base ring tone can be heard at the same time.

If level 0 is selected, the base ringer will be turned off.
Press [INT/OK] to confirm the selection.